SEARCH
Tynax ~ Patent Library

Patent for Sale:

Private Listing: Number 5173 Private  

Confidential: Information on this listing is available under NDA to qualifying buyers.

Overview

The owner of this listing has requested that patent numbers, descriptions and other information be provided only to qualifying buyers under confidentiality agreement.

Please review the patent class information to determine if the patent(s) matching your areas of interest.
For more information, click "Tell Me More" and we will be happy to follow up with you.

Patent Summary

U.S. Patent Classes & Classifications Covered in this listing:

Class 370: Multiplex Communications

This is the generic class for multiplexing or duplexing systems, methods, or apparatus.

Subclass 218: Packet switching system or element
Subclass 228: Spare channel
Subclass 229: DATA FLOW CONGESTION PREVENTION OR CONTROL
Subclass 230: Control of data admission to the network
Subclass 231: End-to-end flow control
Subclass 232: Based on data flow rate measurement
Subclass 235: Flow control of data transmission through a network
Subclass 238: Least cost or minimum delay routing
Subclass 241: DIAGNOSTIC TESTING (OTHER THAN SYNCHRONIZATION)
Subclass 241.1: Using OAM (Operation, Administration and Maintenance) cells
Subclass 250: Of a switching system
Subclass 252: Determination of communication parameters
Subclass 255: Using a particular learning algorithm or technique
Subclass 352: Combined circuit switching and packet switching
Subclass 356: Routing circuit switched traffic through a packet switching network
Subclass 359: Input or output circuit, per se (i.e., line interface)
Subclass 389: Switching a message which includes an address header
Subclass 392: Processing of address header for routing, per se
Subclass 395.2: Connection set-up/disconnect (e.g., Connection Admission Control)
Subclass 395.21: Based on traffic contract (including using setup messages, QoS, delay/bandwidth requirement)
Subclass 395.41: Based on bandwidth allocation (e.g., Weighted Round Robin)
Subclass 395.43: Based on service category (e.g., CBR, VBR, UBR, or ABR)
Subclass 395.6: Adapting detail (e.g., converting to/from ATM, or detail of ATM Adaption Layers (AALs))
Subclass 395.64: Adapting connection-oriented variable bit rate (VBR) data (e.g., MPEG/HDTV packet video/audio over ATM or using AAL2)
Subclass 396: Distributed switching
Subclass 398: Centralized switching
Subclass 401: Bridge or gateway between networks
Subclass 411: Including sorting and merging networks
Subclass 412: Queuing arrangement
Subclass 413: Having both input and output queuing
Subclass 414: Contention resolution for output
Subclass 417: Having output queuing only
Subclass 422: Centralized switching
Subclass 466: Converting between protocols

Class 714: Error Detection/Correction And Fault Detection/Recovery

This class provides for process or apparatus for detecting and correcting errors in electrical pulse or pulse coded data; it also provides for process or apparatus for detecting and recovering from faults in electrical computers and digital data processing systems, as well as logic level based systems.

Subclass 16: Forward recovery (e.g., redoing committed action)
Subclass 43: Bus, I/O channel, or network path component fault
Subclass 724: Digital logic testing

Class 726: Information Security

This class provides, within a computer or digital data processing system, for processes or apparatus for increasing a system s extension of protection of system hardware, software, or data from maliciously caused destruction, unauthorized modification, or unauthorized disclosure. It provides for protection of data processing systems, apparatus, and methods as well as protection of information and services. Subject matter included in this class includes security policies, access control, monitoring, scanning data, countermeasures, usage control, and data protection from maliciously caused destruction, unauthorized modification, or unauthorized disclosure, and includes protection of hardware, and user protection, e.g., privacy, etc.

Subclass 25: Vulnerability assessment

Class 709: Electrical Computers And Digital Processing Systems: Multicomputer Data Transferring

This class provides for an electrical computer or digital data processing system or corresponding data processing method including apparatus or steps for transferring data or instruction information between a plurality of computers wherein the computers employ the data or instructions before or after transferring and the employing affects said transfer of data or instruction information. The class includes - process or apparatus for transferring data among a plurality of spatially distributed (i.e., situated, at plural locations) computers or digital data processing systems via one or more communications media (e.g., computer networks).

Subclass 202: Median
Subclass 232: Array of elements (e.g., AND/OR array, etc.)
Subclass 235: Uses look-up table

Class 707: Data Processing:Database And File Management Or Data Structures

This is the generic class for data processing apparatus and corresponding methods for the retrieval of data stored in a database or as computer files. It provides for data processing means or steps for generic data, file and directory upkeeping, file naming, and file and database maintenance including integrity consideration, recovery, and versioning. There are three main divisions: 1. database and file accessing; 2. database schema and data structure; 3. file and database maintenance.


Class 380: Cryptography

Equipment and processes which (a) conceal or obscure intelligible information by transforming such information so as to make the information unintelligible to a casual or unauthorized recipient, or (b) extract intelligible information from such a concealed representation, including breaking of unknown codes and messages.

Subclass 273: Rekeying system
Subclass 277: KEY MANAGEMENT

Class 713: Electrical Computers And Digital Processing Systems: Support

This class provides, within a computer or digital data processing system, for the following processes or apparatus for: 1. establishing original operating parameters or data for a computer or digital data processing system, such as, allocating extended or expanded memory, specifying device drivers, paths, files, buffers, disk management, etc.; 2. for changing system settings or operational modes in a computer or digital data processing system after they have been set; 3. for increasing a systemís extension of protection of system hardware,software, or data frm maliciously caused destruction, unauthorized modification, or unauthorized disclosure; 4. for modifying or responding to the available power to a computer or digital data processing system or programmable calculator; 5. for synchronization of two or more processors; 6. wherein a clock or timing signals, timing pulses, or data associated with the control or regulation of any one or combination of processing components, memory components, and peripheral components are caused to operate in synchronization; 7. for generation, division, or distribution of clock signals, pulse signals, or timing signals in a computer or digital data processing system from one or more sources into groups of continuous and successive time increments, and including event timing and counting, and the correction of the clock signals, pulse signals, or timing signals; 8. wherein there is a significant temporal, incremental or sequencing control provided to one or more computers, digital data processing systems, processors, memory, or peripherals, or to data transmission between these systems or components.

Subclass 194: Tamper resistant

Class 379: Telephonic Communications

(1) Systems, processes and instruments for the two-way electrical transmission of intelligible audio information having arbitrary content over a link including an electrical conductor, between spaced apart locations, so as to enable conversation therebetween, and intended for the private use of a listener or a group of listeners. The term "intelligible" used above is intended to include the capability for transmission of speech or the like (e.g., music), rather than restriction to a specified audible signal, such as a bell or buzzer. (2) Switching, signalling or signal transmission peculiar to, or specified as for a telephone or a telephone system, except for multiplex communications as indicated in Lines With Other Classes.

Subclass 88.17: Interaction with an external nontelephone network (e.g., Internet)

Class 705: Data Processing:Financial, Business Practice, Management, Or Cost/Price Determination

This is the generic class for apparatus and corresponding methods for performing data processing operations, in which there is a significant change in the data or for performing calculation operations wherein the apparatus or method is uniquely designed for or utilized in the practice, administration, or management of an enterprise, or in the processing of financial data. It also provides for apparatus and corresponding methods for performing data processing or calculating operations in which a charge for goods or services is determined.


Class 718: Electrical Computers And Digital Processing Systems: Virtual Machine Task Or Process Management Or Task Management/Control

This class provides for an electrical computer or digital data processing system or corresponding data processing method including apparatus or steps for administrating over processor or job execution in a digital data processing system whether in a virtual machine or otherwise. Subject matter includes - virtual machine task or process management, and task management or control in general.

Subclass 105: Load balancing

Class 398: Optical Communications

This class provides for all types of communication systems in which optical signals are used to transmit modulated carrier wave information between points. Such communication includes transmitting an intelligence-bearing signal from one point to another in the form of variations in a characteristic of the light wave. The communication may be through free space, fibers or waveguides. These are used to transfer the information with an optical beam, and this beam can be used in various communication schemes to enable the most effective or desired method of moving the information, including optical multiplexing when plural information signals or plural transmitters and receivers are utilized.

Subclass 3: In a ring or loop
Subclass 5: Spare channel or standby optical fiber
Subclass 59: Ring or loop

Class 703: Data Processing:Structural Design, Modeling, Simulation, And Emulation

This class provides for electrical data processing apparatus and corresponding methods for the following processes or apparatus: 1. for sketching or outlining of layout of a physical object or part. 2. for representing a physical process or system by mathematical expression. 3. for modeling a physical system which includes devices for performing arithmetic and some limited logic operation upon an electrical signal, such as current or voltage, which is a continuously varying representation of physical quantity. 4. for modeling to reproduce a nonelectrical device or system to predict its performance or to obtain a desired performance. 5. for modeling and reproducing an electronic device or electrical system to predict its performance or to obtain a desired performance. 6. that allows the data processing system to interpret and execute programs written for another kind of data processing system.

Subclass 21: Computer or peripheral device

Class 701: Data Processing:Vehicles, Navigation, And Relative Location

This class provides for electrical computers, digital data processing systems, and data processing processes for transferring data between computers or processes wherein the computers or processes employ the data before or after transferring and the employing affects the transfer of data therebetween. This class is for electricalapparatus and corresponding methods for performing data processing operations in which there is a significant change in the data or for performing calculation operations wherein the electrical data processing system or calculating computer functions to indicate a condition of a vehicle, to regulate the movement of a vehicle, to monitor the operation of a vehicle, or to solve a diagnostic problem with the vehicle. It also provides electrical apparatus and corresponding methods wherein the electrical data processing system or calculating computer function to determine the course, position, or distance traveled. It further provides electrical apparatus and corresponding methods wherein the electrical data processing system or calculating computer functions to determine the relative location of an object (e.g., person or vehicle) and may include communication of the determined relative location to a remote location. In this class there are three main divisions: 1. vehicle control, guidance, operation or indication; 2. navigation; 3. relative location

Subclass 13: Spacecraft or satellite
Subclass 20: Railway vehicle speed control
Subclass 24: On-board computer interact with a host computer