Patent for Sale:

Private Listing: Number 3524 Private  

Confidential: Information on this listing is available under NDA to qualifying buyers.

Overview

The owner of this listing has requested that patent numbers, descriptions and other information be provided only to qualifying buyers under confidentiality agreement.

Please review the patent class information to determine if the patent(s) matching your areas of interest.
For more information, click "Tell Me More" and we will be happy to follow up with you.

Patent Summary

U.S. Patent Classes & Classifications Covered in this listing:

Class 714: Error Detection/Correction And Fault Detection/Recovery

This class provides for process or apparatus for detecting and correcting errors in electrical pulse or pulse coded data; it also provides for process or apparatus for detecting and recovering from faults in electrical computers and digital data processing systems, as well as logic level based systems.

Subclass 42: Memory or storage device component fault
Subclass 47: Performance monitoring for fault avoidance
Subclass 704: Error count or rate
Subclass 707: Synchronization control
Subclass 710: Replacement of memory spare location, portion, or segment
Subclass 719: Read-in with read-out and compare
Subclass 746: Digital data error correction
Subclass 752: Forward correction by block code
Subclass 755: Double encoding codes (e.g., product, concatenated)
Subclass 756: Cross-interleave Reed-Solomon code (CIRC)
Subclass 757: Parallel generation of check bits
Subclass 758: Error correcting code with additional error detection code (e.g., cyclic redundancy character, parity)
Subclass 761: Random and burst error correction
Subclass 762: Burst error correction
Subclass 763: Memory access
Subclass 764: Error correct and restore
Subclass 765: Error pointer
Subclass 766: Check bits stored in separate area of memory
Subclass 767: Code word for plural n-bit (n>1) storage units (e.g., x4 DRAMs)
Subclass 769: Dynamic data storage
Subclass 770: Disk array
Subclass 774: Adaptive error-correcting capability
Subclass 775: Synchronization
Subclass 781: Code based on generator polynomial
Subclass 784: Reed-Solomon code
Subclass 785: Syndrome computed
Subclass 786: Forward error correction by tree code (e.g., convolutional)
Subclass 789: Synchronization
Subclass 792: Trellis code
Subclass 794: Maximum likelihood
Subclass 795: Viterbi decoding
Subclass 796: Branch metric calculation
Subclass 799: Error/fault detection technique
Subclass 804: Plural dimension parity check
Subclass 805: Storage accessing (e.g., address parity check)
Subclass 809: Code constraint monitored
Subclass 814: Data timing/clocking

Class 377: Electrical Pulse Counters, Pulse Dividers, Or Shift Registers: Circuits And Systems

This is the generic class for circuits or devices for making a count of electrical pulses; for circuits or devices for producing output pulses which are a fraction of the number of input. Also included are pulse multipliers which make use of pulse dividing circuits.

Subclass 116: Including logic circuit

Class 331: Oscillators

This is the generic class for electrical oscillators.

Subclass 16: Tuning compensation
Subclass 17: Particular error voltage control (e.g., intergrating network)
Subclass 177R: WITH FREQUENCY ADJUSTING MEANS
Subclass 179: Step-frequency change (e.g., band selection, frequency-shift keying)
Subclass 185: WITH PARTICULAR SOURCE OF POWER OR BIAS VOLTAGE
Subclass 186: Regulated
Subclass 1A: AFC with logic elements
Subclass 25: Signal or phase comparator
Subclass 34: Particular frequency control means
Subclass 36C: Capacitor controlled AFC
Subclass 45: POLYPHASE OUTPUT
Subclass 57: RING OSCILLATORS
Subclass 74: COMBINED WITH PARTICULAR OUTPUT COUPLING NETWORK
Subclass 8: Transistorized controls

Class G9B/20.053:


Class 361: Electricity: Electrical Systems And Devices

Systems or devices which provide safety and protection for other systems and devices; control circuits for electromagnetic devices and non-electromagnetic-type relays. Systems or devices which discharge, or prevent the accumulation of electrical charge on or in an object or material; circuits for charging objects or materials. Systems for generating or conducting an electric charge. Systems which process electrical speed signals. Circuits for reversing the polarity of an electric circuit. Systems which cause the ignition of a fuel or an explosive charge. Systems and processes for demagnetizing a magnetic field. Transformers and inductors with integral switch, capacitor or lock. Electrostatic capacitors, per se. Housings and mounting assemblies with plural diverse electrical components. Electrolytic systems and devices.

Subclass 111: Transient responsive
Subclass 56: Voltage responsive

Class 257: Active Solid-State Devices (E.G., Transistors, Solid-State Diodes)

This class provides for active solid-state electronic devices, that is, electronic devices or components that are made up primarily of solid materials, usually semiconductors, which operate by the movement of charge carriers - electrons or holes - which undergo energy level changes within the material and can modify an input voltage to achieve rectification, amplification, or switching action, and are not classified elsewhere.

Subclass 357: In complementary field effect transistor integrated circuit

Class G9B/20.041:


Class 375: Pulse Or Digital Communications

This is the generic class for pulse or digital communication systems using electrical or electromagnetic signals. Such communication includes transmitting an intelligence bearing signal from one point to another in the form of discrete variations in some parameter of the electrical or electromagnetic signal.

Subclass 232: Adaptive
Subclass 240.14: Plural
Subclass 240.15: Bidirectional
Subclass 240.25: Specific decompression process
Subclass 317: Automatic baseline or threshold adjustment
Subclass 326: Carrier recovery circuit or carrier tracking
Subclass 340: Particular pulse demodulator or detector
Subclass 341: Maximum likelihood decoder or viterbi decoder
Subclass 345: Automatic gain control
Subclass 346: Interference or noise reduction
Subclass 350: By filtering (e.g., digital)
Subclass 354: SYNCHRONIZERS
Subclass 355: Synchronizing the sampling time of digital data
Subclass 365: Synchronization word
Subclass 371: Phase displacement, slip or jitter correction
Subclass 376: Phase locked loop
Subclass 377: MISCELLANEOUS
Subclass E7.004: Involving pointers to the video stream (EPO)
Subclass E7.027: Decoder-specific arrangements (EPO)
Subclass E7.093: Implementation arrangements, e.g., implementation by hardware of software (EPO)
Subclass E7.094: Memory arrangements (EPO)
Subclass E7.096: Display on the fly, e.g., simultaneous writing to and reading from decoder memory (EPO)
Subclass E7.143: Transformer, e.g., 8x8 or 2x4x8 DCT, selection among a plurality of different transform operations (EPO)
Subclass E7.153: Rate distortion criteria (EPO)
Subclass E7.176: Block or macroblock (EPO)
Subclass E7.177: Transform coefficient (EPO)
Subclass E7.181: Picture (EPO)
Subclass E7.185: Chrominance (EPO)
Subclass E7.211: Involving transform and predictive coding , e.g., hybrid coding, Motion Picture Experts Group (MPEG) coding (EPO)
Subclass E7.212: Involving the use of at least one adaptive element (EPO)
Subclass E7.252: Involving spatial subsampling or upsampling; Alteration of picture size or resolution (EPO)
Subclass E7.254: With control of frame rate, skipping or repetition at encoding or decoding side (EPO)
Subclass E7.206: Involving both PCM encoding and DPCM encoding (EPO)
Subclass E7.271: Said other signal being a related audio signal (EPO)
Subclass E7.279: Systems for detection or correction of transmission errors (EPO)

Class 455: Telecommunications

This is the generic class for modulated carrier wave communications not elsewhere classifiable.

Subclass 234.1: Automatic

Class G9B/20.01:


Class 360: Dynamic Magnetic Information Storage Or Retrieval

This class is an integral part of Class 369, Dynamic Information Storage or Retrieval, and is the specific class for apparatus and corresponding processes for the storage and retrieval of information based on relative movement between a magnetic record carrier and a transducer. It includes apparatus and corresponding processes for making copies or editing of records falling within the above definition. A magnetic record carrier within the meaning of this class is an element which consists of a magnetizable material or is comprised of a coating or impregnation of magnetizable material which is intended for the storage of more than a single bit of information.

Subclass 25: CHECKING RECORD CHARACTERISTICS OR MODIFYING RECORDING SIGNAL FOR CHARACTERISTIC COMPENSATION
Subclass 29: MODULATING OR DEMODULATING
Subclass 31: MONITORING OR TESTING THE PROGRESS OF RECORDING
Subclass 32: CONVERTING AN ANALOG SIGNAL TO DIGITAL FORM FOR RECORDING; REPRODUCING AND RECONVERTING
Subclass 39: GENERAL PROCESSING OF A DIGITAL SIGNAL
Subclass 40: In specific code or form
Subclass 41: Nonreturn to zero
Subclass 45: Pulse crowding correction
Subclass 46: Head amplifier circuit
Subclass 48: Data in specific format
Subclass 49: Address coding
Subclass 51: Data clocking
Subclass 53: Data verification
Subclass 60: Recording-or erasing-prevention
Subclass 61: Signal switching
Subclass 65: Specifics of equalizing
Subclass 66: Specifics of biasing or erasing
Subclass 67: Specifics of the amplifier
Subclass 72.2: Responsive to recorded address
Subclass 73.02: Control of relative speed between carriers
Subclass 73.03: Rotary carrier
Subclass 75: Controlling the head
Subclass 77.02: Rotary carrier
Subclass 77.04: By memory storage of repeatable error or correction
Subclass 77.05: By servo signal component from carrier surface separate from information signal bearing surface
Subclass 77.08: Distinct servo sector
Subclass 78.04: For rotary carrier (e.g., disc)
Subclass 78.05: Coarse and fine head drive motors
Subclass 78.06: Specified velocity pattern during access
Subclass 78.09: Including model of servo system or element
Subclass 78.12: Including particular head actuator
Subclass 78.14: By recorded servo reference or address signal
Subclass 294.5: Voice coil adjuster

Class G9B/20.035:


Class 369: Dynamic Information Storage Or Retrieval

Apparatus for the storage or retrieval of arbitrarily variable information which is retained in a storage medium by variation of a physical characteristic. The information is stored or retrieved by causing or sensing a variation of a physical characteristic of the storage medium by a transducer having relative motion along a continuous path.

Subclass 30.12: Particular track portion
Subclass 30.14: Count correction
Subclass 30.23: Buffering
Subclass 30.25: Auxiliary information
Subclass 43: WITH SERVO POSITIONING OF TRANSDUCER ASSEMBLY OVER TRACK COMBINED WITH INFORMATION SIGNAL PROCESSING
Subclass 44.25: Servo signal compared to a reference signal
Subclass 44.28: While track jumping or crossing
Subclass 44.29: Servo loop gain/switching control
Subclass 44.34: Sampling servo system
Subclass 44.35: Servo loop gain/switching control
Subclass 44.41: Arithmetic operation using plural photodetectors
Subclass 47.22: Having location identification information
Subclass 47.48: By synchronous signal
Subclass 47.54: By program or address signal
Subclass 53.11: Including radiation storage or retrieval
Subclass 53.28: Focusing or tracking servo
Subclass 53.29: Transduced location indicating
Subclass 53.35: Signal error correcting or detecting
Subclass 59.1: BINARY PULSE TRAIN INFORMATION SIGNAL
Subclass 59.12: Pulse forming by adjusting binary signal phase or shifting binary signal pulse
Subclass 59.19: Binary signal detecting using a clock signal
Subclass 59.2: Binary signal phase processing
Subclass 59.21: Including sampling or A/D converting
Subclass 59.22: By interpolating or maximum likelihood detecting
Subclass 59.25: Format arrangement processing for auxiliary information
Subclass 120: Having particular radiation sensor
Subclass 124.01: With details of electrical signal processing
Subclass 124.04: Modulating or demodulating
Subclass 124.05: Integrating or sampling
Subclass 124.07: Auxiliary information arrangement processing (e.g., block headers, subcode, or interpolated information, etc.)
Subclass 124.1: Gain processing
Subclass 124.11: Of retrieved signal
Subclass 275.3: Track data format/layout

Class G9B/20.015:


Class G9B/20.049:


Class G9B/20.051:


Class G9B/27.033:


Class G9B/7.018:


Class 329: Demodulators

A demodulator is a device which extracts an arbitrarily varying information carrying signal from a signal formed by varying a characteristic of a repetitious electrical or electromagnetic wave of less than infrared frequency in accordance with this information carrying signal. Classification herein is broadly by the type of modulation exhibited by the input signal. Combinations with basic subject matter included in this class: a demodulator combined with perfecting structure or incorporated in other structure.

Subclass 307: Including phase or frequency locked loop
Subclass 325: Including phase or frequency locked loop

Class 318: Electricity: Motive Power Systems

This is the generic class for system of electrical supply and/or of control for one or more electric motors where the electric motor is claimed in combination with such systems of supply and/or control and the electric motor as claimed constitutes the ultimate and sole electrical load device supplied by the system or constitutes the ultimate and sole electrical device being controlled.

Subclass 135: LINEAR-MOVEMENT MOTORS
Subclass 568.18: Including velocity control
Subclass 568.22: With particular compensation (e.g., gain, offset, etc.)
Subclass 569: Digital or numerical systems
Subclass 591: With mode-engagement features (e.g., manual to automatic)
Subclass 600: Digital or numerical systems
Subclass 625: Plural servomotors
Subclass 626: Limit or end-stop control
Subclass 671: With particular motor control system responsive to the actuating signal
Subclass 802: Responsive to an additional condition
Subclass 85: Synchronizing or phasing control

Class 388: Electricity: Motor Control Systems

This class and Class 318, Electricity: Motive Power Systems are the generic loci for systems of electrical control of electric motors. Currently types of motor covered are direct current (DC) commutating motor: An electric motor designed to operate on direct current and having a commutator electrically connected to a winding of the motor. Modes of motor control covered are: acceleration control, deceleration control and running speed control.


Class G9B/5.181:


Class 341: Coded Data Generation Or Conversion

1) originating or emitting a coded set of discrete signals or 2) translating one code into another code wherein the information signal content remains the same but the formats may differ. For classification herein, at least one of the codes must be a set of pulses or digits and electrical in nature.

Subclass 106: Coding by table look-up techniques
Subclass 107: To or from code based on probability
Subclass 118: CONVERTER COMPENSATION
Subclass 120: CONVERTER CALIBRATION OR TESTING
Subclass 136: Field effect transistor
Subclass 139: Automatic control for increasing converter range (e.g., gain ranging, automatic gain control)
Subclass 143: Differential encoder and/or decoder (e.g., delta modulation, differential pulse code modulation)
Subclass 144: Digital to analog conversion
Subclass 155: Analog to digital conversion
Subclass 50: DIGITAL CODE TO DIGITAL CODE CONVERTERS
Subclass 51: Adaptive coding
Subclass 58: To or from minimum d.c. level codes
Subclass 59: To or from run length limited codes
Subclass 65: To or from Huffman codes
Subclass 68: To or from NRZ (nonreturn-to-zero) codes
Subclass 95: Byte length changed
Subclass 97: Gray to binary

Class G9B/20.009:


Class G9B/20.046:


Class G9B/5.024:


Class G9B/5.033:


Class G9B/19.001:


Class G9B/20.028:


Class 708: Electrical Computers: Arithmetic Processing And Calculating

This is the generic class for electrical apparatus and corresponding methods for performing calculation operations. There are three main divisions: 1. electrical hybrid calculating computers; 2. electrical digital calculating computers; 3. electrical analog calculating computers.

Subclass 300: Filtering
Subclass 319: Transversal
Subclass 323: Equalizer
Subclass 491: Residue number
Subclass 492: Galois field
Subclass 650: Division
Subclass 819: Filtering

Class G9B/20.014:


Class G9B/27.019:


Class G9B/27.037:


Class 365: Static Information Storage And Retrieval

Apparatus or corresponding processes for the static storage and retrieval of information. For classification herein, the storage system must be (1) static, (2) a singular storage element or plural elements of the same type, (3) addressable.

Subclass 230.05: Multiple port access
Subclass 230.09: Combined random and sequential addressing
Subclass 239: Sequential
Subclass 240: Using shift register

Class G9B/20.052:


Class G9B/27.052:


Class 700: Data Processing: Generic Control Systems Or Specific Applications

This class is structured into two main divisions: (1)for the combination of a data processing or calculating computer apparatus (or corresponding methods for performing data processing or calculating operations) AND a device or apparatus controlled thereby, the entirety hereinafter referred to as a "control system". (2)for data processing or calculating computer apparatus (or corresponding methods for performing data processing or calculating operations) wherein the data processing or calculating computer apparatus is designed for or utilized in a particular art device, system, process, or environment, or is utilized for the solution of a particular problem in a field other than mathematics (arithmetic processing per se is classified elsewhere).

Subclass 17: Operator interface (e.g., display with control)
Subclass 28: Optimization or adaptive control
Subclass 37: Gain (e.g., tuning)
Subclass 38: Having perturbation
Subclass 40: Plural modes
Subclass 42: Proportional-Integral-Derivative (P-I-D)
Subclass 45: Combined with feedback
Subclass 48: Neural network
Subclass 71: Specific compensation or stabilization feature
Subclass 77: Fine/coarse

Class G9B/5.225:


Class 710: Electrical Computers And Digital Data Processing Systems: Input/Output

This class provides, within a computer or digital data processing system with the following processes or apparatus for 1. transferring data from one or more peripherals to one or more computers or digital data processing systems for the latter to process, store, or further transfer or for transferring data from the computers or digital data processing systems to the peripherals; 2. for interconnecting or communicating between two or more components connected to an interconnection medium (e.g., a bus) within a single computer or digital data processing system; 3. for preventing access to a shared resource of a computer or digital data processing system; 4. for granting access to a shared resource of a computer of digital data processing system by one of a plurality of components of the computer or digital data processing system by interrogating each of the components in a predetermined order; 5. for determining which of a plurality of components of a computer or digital data processing system contending for access to a shared resource shall be granted access at any one time based upon a predetermined criteria; and 6. for stopping, halting, or suspending a current processing function within a computer or digital data processing system.

Subclass 4: Address data transfer
Subclass 5: Input/Output command process
Subclass 7: Concurrently performing Input/Output operation and other operation unrelated to Input/Output
Subclass 20: Concurrent Input/Output processing and data transfer
Subclass 22: Direct Memory Accessing (DMA)
Subclass 52: Input/Output data buffering
Subclass 74: For data storage device
Subclass 112: Bus request queuing
Subclass 305: Bus interface architecture
Subclass 307: Variable or multiple bus width
Subclass 262: Interrupt inhibiting or masking
Subclass 264: Interrupt prioritizing
Subclass 266: Programmable interrupt processing

Class 711: Electrical Computers And Digital Processing Systems: Memory

This class provides, within an electrical computer or digital data processing system, for the following processes and apparatus 1. for addressing memory wherein the processes and apparatus involve significant address manipulating (e.g., combining, translating, or mapping and other techniques for formatting and modifying address data) and are combined with specific memory configurations or memory systems; 2. for accessing and controlling memory (e.g., transferring and modifying address data, selecting storage devices, scheduling access); and 3. for forming memory addresses (e.g., virtual memory addressing, address translating, translation-lookaside buffers (TLBs), boundary checking, and page mode).

Subclass 112: Direct access storage device (DASD)
Subclass 202: Address mapping (e.g., conversion, translation)

Class G9B/19.017:


Class G9B/19.027:


Class G9B/19.046:


Class G9B/21.014:


Class G9B/21.02:


Class G9B/5.188:


Class G9B/5.217:


Class 715: Data Processing: Presentation Processing Of Document

This class provides for data processing means or steps wherein a) human perceptible elements of electronic information (i.e., text or graphics) are gathered, associated, created, formatted, edited, prepared, or otherwise processed in forming a unified collection of such information storable as a distinct entity, b) a users interaction with a computer system is used to control the presentation of display data; such interaction is interpreted and used by a data processor or computer architecture wherein system level elements of computation or data processing techniques are used prior to use with or in a specific display system, or c) a small program takes over a display screen if there are no keystrokes or mouse movements for a specified duration.


Class 386: Television Signal Processing For Dynamic Recording Or Reproducing

Apparatus and corresponding processes for processing a sequence of images, in which the light variation composing the images may change with time for dynamic recording or reproducing of the sequence of images. The processing involves the following steps: (a) Receiving a sequence of images from a local (e.g., camera, etc.) or remote source (e.g. broadcasting station, satellite, cable, etc.); (b) Converting the received sequence of images into a form suitable for dynamic storage, which form may or may not be reproduced later; or (c) Converting retrieved information from a dynamic storage medium into a sequence of images.

Subclass 101: Time compressing
Subclass 106: Disc
Subclass 110: Line, field, or frame skipping
Subclass 111: Intraframe or interframe
Subclass 47: Drop-out correction
Subclass 65: Having time code for addressing signal
Subclass 69: Track searching
Subclass 70: Disc
Subclass 75: Having audio
Subclass 96: Audio signal
Subclass 97: Selective mode (e.g., mono, stereo, or bilingual)
Subclass 98: Multiplexing or demultiplexing
Subclass E5.016: With processing of the sound signal (EPO)
Subclass E5.036: For signals recorded by pulse code modulation (EPO)
Subclass E5.064: On discs or drums (EPO)
Subclass E9.013: Involving data reduction (EPO)
Subclass E9.017: Using time division multiplex of the PCM audio and PCM video signals (EPO)
Subclass E9.038: Using time division multiplex (EPO)

Class G9B/20.001:


Class G9B/27.017:


Class G9B/27.034:


Class 348: Television

Generating, processing, transmitting or transiently displaying a sequence of images, either locally or remotely, in which the local light variations composing the images may change with time.

Subclass 515: Audio to video

Class 327: Miscellaneous Active Electrical Nonlinear Devices, Circuits, And Systems

This is the residual class for electrical devices, circuits or systems having an output not directly proportional to its input and comprising at least one component which can provide gain or can route electrical current and which device, circuit or system does not form a complete system such as is classified specifically elsewhere or a subcombination of utility only in such elsewhere classified system.

Subclass 156: Phase lock loop
Subclass 157: With charge pump
Subclass 307: Baseline or DC offset correction
Subclass 551: Unwanted signal suppression
Subclass 57: With latching type element (e.g., flip-flop, etc.)
Subclass 64: With logic or bistable circuit
Subclass 95: Having feedback

Class G9B/5.221:


Class G9B/7.043:


Class G9B/21.015:


Class G9B/5.228:


Class 703: Data Processing:Structural Design, Modeling, Simulation, And Emulation

This class provides for electrical data processing apparatus and corresponding methods for the following processes or apparatus: 1. for sketching or outlining of layout of a physical object or part. 2. for representing a physical process or system by mathematical expression. 3. for modeling a physical system which includes devices for performing arithmetic and some limited logic operation upon an electrical signal, such as current or voltage, which is a continuously varying representation of physical quantity. 4. for modeling to reproduce a nonelectrical device or system to predict its performance or to obtain a desired performance. 5. for modeling and reproducing an electronic device or electrical system to predict its performance or to obtain a desired performance. 6. that allows the data processing system to interpret and execute programs written for another kind of data processing system.

Subclass 24: Of peripheral device

Class G9B/5.192:


Class G9B/5.22:


Class G9B/20.047:


Class G9B/20.059:


Class 713: Electrical Computers And Digital Processing Systems: Support

This class provides, within a computer or digital data processing system, for the following processes or apparatus for: 1. establishing original operating parameters or data for a computer or digital data processing system, such as, allocating extended or expanded memory, specifying device drivers, paths, files, buffers, disk management, etc.; 2. for changing system settings or operational modes in a computer or digital data processing system after they have been set; 3. for increasing a systemís extension of protection of system hardware,software, or data frm maliciously caused destruction, unauthorized modification, or unauthorized disclosure; 4. for modifying or responding to the available power to a computer or digital data processing system or programmable calculator; 5. for synchronization of two or more processors; 6. wherein a clock or timing signals, timing pulses, or data associated with the control or regulation of any one or combination of processing components, memory components, and peripheral components are caused to operate in synchronization; 7. for generation, division, or distribution of clock signals, pulse signals, or timing signals in a computer or digital data processing system from one or more sources into groups of continuous and successive time increments, and including event timing and counting, and the correction of the clock signals, pulse signals, or timing signals; 8. wherein there is a significant temporal, incremental or sequencing control provided to one or more computers, digital data processing systems, processors, memory, or peripherals, or to data transmission between these systems or components.

Subclass 2: Loading initialization program (e.g., booting, rebooting, warm booting, remote booting, BIOS, initial program load (IPL), bootstrapping)

Class 381: Electrical Audio Signal Processing Systems And Devices

This class provides for: (a) wired one-way electrical transmission or processing systems for audio signals, (b) Stereophonic systems, which are not elsewhere classified, (c) instrument or process for converting an electrical audio information signal to or from humanly audible form.

Subclass 71.1: ACOUSTICAL NOISE OR SOUND CANCELLATION

Class G9B/27.03:


Class G9B/20.054:


Class G9B/5.216:


Class G9B/5.227:


Class G9B/5.189:


Class G9B/5.202:


Class G9B/5.222:


Class 382: Image Analysis

This is the generic class for apparatus and corresponding methods for the automated analysis of an image or recognition of a pattern. Included herein are systems that transform an image for the purpose of (a) enhancing its visual quality prior to recognition, (b) locating and registering the image relative to a sensor or stored prototype, or reducing the amount of image data by discarding irrelevant data, and (c) measuring significant characteristics of the image.

Subclass 233: Including details of decompression
Subclass 250: Discrete cosine or sine transform
Subclass 261: Adaptive filter
Subclass 299: Raising or lowering the image resolution (e.g., subpixel accuracy)
Subclass 300: Interpolation

Class G9B/20.05:


Class G9B/20.06:


Class G9B/5.204:


Class 326: Electronic Digital Logic Circuitry

This is the generic class for electronic digital logic devices, circuitry and subcombinations thereof, wherein non-arithmetical operations are performed upon discrete electrical signals representing a value normally described by numerical digits.

Subclass 34: With field effect-transistor
Subclass 38: Having details of setting or programming of interconnections or logic functions
Subclass 39: Array (e.g., PLA, PAL, PLD, etc.)
Subclass 50: Complementary FETs
Subclass 71: TTL to/from CMOS
Subclass 83: Field-effect transistor

Class 702: Data Processing:Measuring, Calibrating, Or Testing

This class provides for apparatus and corresponding methods wherein the data processing system or calculating computer is designed for or utilized in an environment relating to a specific or generic measurement system, a calibration or correction system, or a testing system.

Subclass 189: Measured signal processing
Subclass 190: Signal extraction or separation (e.g., filtering)
Subclass 193: By threshold comparison

Class G9B/7.049:


Class G9B/7.047:


Class 370: Multiplex Communications

This is the generic class for multiplexing or duplexing systems, methods, or apparatus.

Subclass 262: Operator setup of the conference
Subclass 477: Transmission bandwidth conservation

Class G9B/27.012:


Class G9B/7.066:


Class G9B/7.069:


Class G9B/7.094:


Class G9B/7.034:


Class G9B/20.03:


Class G9B/20.012:


Class G9B/20.063:


Class 345: Computer Graphics Processing And Selective Visual Display Systems

Processes and apparatus for selective electrical control of two or more light-generating or light-controlling display elements* in accordance with a received or stored image data signal. The image data includes character, graphical information or display attribute data. The image data may include, for example, information data from a peripheral input device, from the reception of a television signal, from the recognition of image data, or from the generation or creation of image data by a computer.

Subclass 501: COMPUTER GRAPHIC PROCESSING SYSTEM

Class 719: Electrical Computers And Digital Processing Systems: Interprogram Communication Or Interprocess Communication (Ipc)

This class provides for an electrical computer or digital data processing system or corresponding data processing method including apparatus or steps for exchanging data or messages between two executing programs or processes, independent of the hardware used in the communication.

Subclass 321: DEVICE DRIVER COMMUNICATION

Class G9B/27.05:


Class 330: Amplifiers

This is the generic class for amplifiers, included: Amplifiers having all types of active elements (or amplifying devices), amplifier systems having plural amplifier channels, cascade amplifiers, push-pull amplifiers and other amplifiers having plural amplifier devices. Also included are amplifiers with plural signal sources or plural loads. Amplifiers including the means coupling the signal source to the amplifier or coupling the amplifier to the load or between cascaded stages are also included. Amplifiers combined with tone control means. Amplifiers combined with amplitude (volume) control means whether by manual control, by control of an electrode D.C. bias. Amplifiers combined with power supply. Amplifiers combined with structural features of the amplifier or the amplifier circuit elements. Amplifiers having signal feedback means.

Subclass 254: Having gain control means
Subclass 260: Having signal feedback means

Class G9B/19.04:


Class 438: Semiconductor Device Manufacturing: Process

This class provides for manufacturing a semiconductor containing a solid-state device for the following purposes: (a) conducting or modifying an electrical current, (b) storing electrical energy for subsequent discharge within a microelectronic integrated circuit, or (c) converting electromagnetic wave energy to electrical energy or electrical energy to electromagnetic energy. Also operations involving: (1) coating a substrate with a semiconductive material, or (2) coating a semiconductive substrate or substrate containing a semiconductive region. It also provides for operations involving etching a semiconductive substrate or etching a substrate containing a semiconductive region. The class provides for packaging or treatment of packaged semiconductor.

Subclass 15: Packaging (e.g., with mounting, encapsulating, etc.) or treatment of packaged semiconductor

Class 60: Power Plants

The residual class concerned with the driving of a load by the conversion of heat, pressure, radiant, or gravitational energy into mechanical motion. It includes a motor in combination with its energy supply or its exhaust treatment. It also includes the motors, per se, combinations of motors, and elements specialized for use in such energy conversion that are not specifically provided for elsewhere.

Subclass 274: Anti-pollution
Subclass 276: Having means analyzing composition of exhaust gas
Subclass 285: Engine fuel, air, or ignition controlled by sensor of reactor condition

Class G9B/20.056:


Class G9B/19.005:


Class G9B/5:


Class 324: Electricity: Measuring And Testing

This is the residual home for all subject matter, not elsewhere classified, relating to the measuring, testing (or sensing) of electric properties, (e.g., determining ground resistivity, determining frequency of an alternating current, determining kilowatt hour demand), or the measuring, testing or sensing of nonelectric properties by electric means (e.g., determining moisture, a nonelectric property, by measuring conductance with a resistance bridge; determining speed, a nonelectric property by use of an electric tachometer).

Subclass 76.19: Frequency spectrum analyzer

Class G9B/5.191:


Class G9B/7.005:


Class G9B/7.093:


Class G9B/7.092:


Class 706: Data Processing:Artificial Intelligence

This is a generic class for artificial intelligence type computers and digital data processing systems and corresponding data processing methods and products for emulation of intelligence (i.e., knowledge based systems, reasoning systems, and knowledge acquisition systems); and including systems for reasoning with uncertainty (e.g., fuzzy logic systems), adaptive systems, machine learning systems, and artificial neural networks.

Subclass 15: NEURAL NETWORK
Subclass 22: Signal processing (e.g., filter)
Subclass 23: Control

Class G9B/5.19:


Class G9B/5.195:


Class G9B/7.016:


Class G9B/5.198:


Class G9B/20.011:


Class G9B/20.055:


Class G9B/20.061:


Class G9B/5.223: